

1: Gather supplies
-Pick out which house kit you would like to build
-You will be given a bucket, trowel, paintbrush, scoop, and mortar
-You will also be provided with a tablecloth, apron, gloves, paper towel, and wet wipes to keep you and your space clean.

2: Sort materials
-Open the box and remove the materials list
-Open the bag of bricks and sort them based on type
-Double check that there are no missing pieces

3: Create mortar
-Put 2 scoops of powder and 3 scoops of water into the bucket
-Mix with the spatula until mortar is a smooth consistency

4: Start building
-Start building while following the kit instructions
-Use the trowel to scoop a small amount of mortar and spread it onto the bottom of your first brick
-Place the brick onto the base and push down gently

5: Clean edges
-Use a moist paintbrush to clean up the extra mortar on the edges of your brick
-Make sure the paintbrush isn't too wet
-Don't wait too long to clean the edges or the mortar will dry and become difficult to remove

6: Check progress
-As you build, check the instructions often to avoid mistakes
-Make sure the mortar is used in between all bricks for best results

7: Add accessories
-Once you have finished the brickwork, you can add the accessories
-If you want, you can use a glue gun during this step to adhere the accessories to the base

8: All done
Your building is done and ready to show off!
Tips and Tricks
-Bricks may not stick to each other properly if you don't use enough mortar
-The mortar takes around 10 minutes to dry fully.
-These kits are reusable! Simply soak the brick building in water and the moratr will dissolve. Once the bricks have dried, you can go back to step 2 and do it all over again!